Manual / EN MOUNTING 1. Place the plinths on the floor where you want the cabinets to be. All adjustable feet must be twisted in on hard floor, and twisted out 1-2 mm on soft floor/carpet. 2. Locate the highest point of the plinth. (Often is the highest point in a corner tow- ards the wall). 3. Level the rear edge of the plinths measured from the highest point by adjusting with the adjustable feet. Use a bubble level to check if the rear edge is 100 % leveled up. 4. Afterwards level the front edge of the plinths in the same way by means of adju- stable feet and the bubble level until both depth and length is 100 % leveled up. 5. Join the plinths by drilling a Ø8 hole in the plinth ends where they need to be joi- ned, then mount the enclosed connecting screws. 6. Place the cabinets on the plinths. NB: When two cabinets are placed on top of each other you must put anti-slip rubber pieces in between.
Download PDF fil